REVERSE THE FREE RUNNING CLUTCHES
NOTE
The procedure for the CLUTCH left and right is the same.
1
.
Push the complete assembly in and hold it. Take out the C-RING.
2
.
Slide out the SHAFT until the GEAR with the FREE RUNNING CLUTCH comes free.
3
.
Reverse the GEAR.
4
.
Slide in the SHAFT and secure it with the C-RING.
5
.
Check on the ML700 side that the CLUTCH is engaged when the FILM is transported
into the SBS CARRIAGE.
6
.
Check on the PROCESSOR side that the CLUTCH is engaged when the FILM is
transported out of the SBS CARRIAGE.
7
.
Check that correct rotation of the clutches is achieved. Manually rotate MOTOR M2.
If the CARRIAGE is on the ML700 side the BELTS must transport the FILM away from
the ML700. If the CARRIAGE is on the PROCESSOR side, the BELTS must transport
the FILM to the PROCESSOR.
SHAFT
GEAR WITH FREE RUNNING CLUTCH
C-RING
KEY
figure 12-2
II 3066-2
10/98
12-2
KODAK AG, Stuttgart
Summary of Contents for MULTILOADER 700 PLUS
