Kodak dryview 8300, Service Manual

Page: 107 / 332

REMOVAL INSTRUCTIONS
4-25
2004 March Rev. R 1908110
4-6-5. Capstan Roller
1. Turn off power and disconnect the power cord.
2. Remove left and right covers (paragraph 4-2-1).
3. Remove the capstan roller front cover (Laser Shield) (paragraph 4-2-4).
4. Pivot the wire guides for access (Figure 4-30).
5. Remove the capstan belt (paragraph 4-8-7).
6. Remove the attaching screw and clamp, and remove the capstan drive gear (Figure 4-31).
7. Remove the CPU PWA (procedure 4-3-2).
8. Remove the E-ring, washer and bearing from the right end of the capstan roller (Figure 4-32).
9. Remove the bearing from the left end of the roller (Figure 4-32).
10. Slide the capstan roller to the left until it clears the right side chassis, and remove it.
Figure 4-30.