Kodak dryview 8300 Service Manual Download

Page: 214 / 332

SERVICE MANUAL

7-46

1908110 2004 December Rev. S

7-2-19. EC37: Input A/B Image too Large to Print

LOCAL PANEL Message

Host Alarm

Service Log

INPUT A/B IMAGE TOO LARGE TO PRINT

PRESS ENTER TO CONTINUE

Yes

SUMMARY

User is trying to acquire an image larger than the allowable image size for the selected format and

orientation.

SEQUENCE OF EVENTS

•

User selects a format and orientation for printing.

•

User acquires an image.

•

The image is larger than the area available in the selected format and orientation.

•

The error is reported, and the image is not acquired.

PHONE FIX -- OPERATOR CORRECTABLE

Instruct the user to change the format to one with fewer images.

ON SITE --TECHNICIAN CORRECTABLE

Educate the user about the image size limitations of the IMAGER.

TECH TIPS

The printable area of 8 x 10 inch film printed on the IMAGER is 2376 by 2976 pixels. The size of the

images multiplied by the format is the printed area necessary.

THEORY

Summary of Contents for dryview 8300













































































































































































































































































































































Search results

Summary of Contents for dryview 8300

Reviews:

Related manuals for dryview 8300

Brands by name

Popular brands

Kodak dryview 8300, Service Manual

Search results

Summary of Contents for dryview 8300

Reviews:

Related manuals for dryview 8300

Brands by name

Popular brands