SERVICE MANUAL
9-4
1908110 2003 September Rev. Q
9-4.
Print Setup for ATL HDI M/O
The HDI 1000, 3000, and 5000 M/Os can write on 3.5 M/O DISKS using the DEFF format. Use this
procedure to change the M/O disk parameters on each of the ATL HDI Ultrasounds:
1. To access the Setups Options Directory, press [SETUPS].
2. For HDI 3000 software version 38.15 and below, select the “Access Link” directory.
For HDI 3000 software version 39.08 and above, select the “Image Management” directory.
For HDI 5000, select the “Image Management” directory.
3. From the “Printers” menu, select printer parameters:
a. Optical disk user no. = 1 for HDI 1000
= 2 for HDI 3000
= 3 for HDI 5000
b. B & W film format
= 2x3
c. Color film format
= 2x3
d. Printed image dest. = All to B&W printer
4. Close the “Printers” menu.
Note
Some Demo Vans carry all 3 models of HDI Ultrasounds. You must set the parameters for each user
number in the IMAGER to match each HDI model number as described in step 3. If “Autoprint” is set
ON for User 1 in the IMAGER and OFF for all other users, you will not be able to do an autoprint if
you insert a DISK from the HDI 5000.
9-5.
ATL HDI 3000/5000 Video Calibration Test Patterns
When you do a video calibration on an ATL HDI 3000/5000, use the video test patterns:
1. Press [SETUPS].
2. Select the
DIAGNOSTICS
box in the lower left corner.
3. Select
VIDEO TEST PATTERNS UTILITY
.
4. Select
START
and click [OK].
5. Using the SPACE BAR, select the test patterns.
6. When done, click [Exit].
Summary of Contents for dryview 8300
