KNS Ku-BAND RX, Installation And Operation Manual

Page: 95 / 123

87
‘ ’
‘▲’ ‘▼’
‘ ’
‘▲’ ‘▼’
‘ ’
‘▲’ ‘▼’
‘ ’
‘▲’ ‘▼’
‘ ’
Figure 7-33 Configuration of GPS Format & Baudrate
7.2.9 Tilt Sensor Offset
The Tilt sensor has two axes: level and cross. When a tilt sensor or PCU is replaced,
both axes must be leveled by adjusting the offset of each tilt axis. The bubble inclinometer
on the top side of the level cage is used to do this. The bubble must be placed in the
center after the adjustment.
LEVEL OFFSET ANGLE : Adjust this value by using the up and down keys or by typing
the value until the level axis of the tilt sensor box has leveled.
(Press Key ENT to execute the value)
CORSS OFFSET ANGLE : Adjust this value by using the up and down keys or by typing
the value until the cross axis of the tilt sensor box has leveled.
(Press Key ENT to execute the value)
NOTE : The antenna will be initializing when entering the ‘TILT SENSOR OFFSET’ or
selecting the ‘INITIALIZE: YES’ after the adjustment.