KNS Ku-BAND RX, Installation And Operation Manual, Page: 78 / 123

70
non-std way of linear polarity. If a satellite uses standard polarity (most US and EU
satellites), it is not necessary for the operator to input the skew offset. However, in the
case of non-standard polarity satellites, the operator must input the skew offset in the
configuration given under ‘S&T Reference Details’.
Go to ‘Polarity’ (Key ‘4’) and search for the polarity angle where the energy level (DVB
C/N, AVB AGC, RSSD) is at its highest, using either the MANUAL or JOG functions. Then,
changed skew angle value will be ‘default’ in the selections of the skew angle.
Figure 7-13 Check the Energy Level in Jog Manual and Jog Mode