22
3.6.1.5 NMEA Strip Connector
If the ship’s gyro is of the NMEA type, the installer can use an NMEA strip connector. X1,
X2, NO are not available.
Figure 3-21 Layout of the NMEA Strip Connector Pins
NOTE
: Do not use the NMEA strip and the DB-15 gyro connector at the same time as
this may damage the ACU.
3.6.1.6 RJ-45 Console Port
The RJ-45 console port provides the following: Transmits GPS information and
transmits Mute, receives TX lock and external AGC values (0~5 VDC).
Table 3-3 shows the pins of RJ-45 console port. The signal directions are referenced
either into (RX) or out from (TX) the port.
RJ-45 (DTE)
Type
2
RX Lock
4
GND
5
GND
6
GPS
7
TX Mute
8
Ext AGC
All Other Pins
N/A
Table 3-3 Layout of the ACU RJ-45 Interface Pins
Summary of Contents for Ku-BAND RX
