19
3.6.1.4 I/O and Gyro Strip Connector
The I/O and gyro strip connector can receive analog gyro output signals such as
Synchro and Step by Step.
Figure 3-17 Layout of the I/O & Gyro Strip Connector Pins
SW1 and SW2 of the I/O & gyro connector can control the TX mute function of the
modem by “contact closure” when the antenna is in the blockage or the preset block area
(refer to the operation section). Also, SW1 and SW2 supply the selection signal to coax the
switches in VSAT dual-antenna configurations.
The user can select ‘Contact Closure’ or ‘DC 5V Output’ by SW1 and SW3 of the ACU
board, as shown in Figure 3-20 below.
SW1, SW3 Mode
on ACU Board
Function of SW1, SW2in I/O & Gyro Strip Connector
A(Contact Closure)
Contact Closure
B(Power)
Power Output (SW1 : 5V, SW2 : GND)
Table 3-1 SW1 & SW2 Function
SW1, SW3 Mode
on ACU Board
Function of SW1, SW2in I/O & Gyro Strip Connector
Tracking
Block, Initializing, Searching
A(Contact Closure)
SW1 ~ SW2 : Closure
SW1 ~ SW2 : Open
B(Power)
SW1 : 5V, SW2 : GND
SW1 : 0V, SW2 : GND
Table 3-2 SW1 & SW2 Function upto the Status of Antenna
Summary of Contents for Ku-BAND RX
