KNS Ku-BAND RX Installation And Operation Manual Download

Page: 61 / 123

reference.

1. How to choose the DVB carrier using

www.Lyngsat.com

2. Click the desired region (Asia, Europe, Atlantic, America).

3. Select the desired satellite.

4. Write down the four parameters (Frequency, Polarity, Symbol rate, FEC) from

the selected DVB carrier.

TP. Freq

RF RX Frequency(MHz)

H/V

Polarity of Carrier (Horizontal/Vertical)

System

Encryption

System encryption type : DVBS1, DVBS2, DSS

Symbol Rate - the symbol rate unit used by Lyngsat is Kilo-

symbols per second (Ksps).

NOTE

: The NID is not recommended for use with a public DVB carrier in cases where

the NID is not inserted frequently or fast enough to be used in the searching process.

Summary of Contents for Ku-BAND RX




























































































































Search results

Summary of Contents for Ku-BAND RX

Reviews:

Related manuals for Ku-BAND RX

Brands by name

Popular brands

KNS Ku-BAND RX, Installation And Operation Manual

Search results

Summary of Contents for Ku-BAND RX

Reviews:

Related manuals for Ku-BAND RX

Brands by name

Popular brands