KNS Ku-BAND RX, Installation And Operation Manual

Page: 70 / 123

62
7. Operation using Front Key Pad
There are two modes in the ACU configuration: Configuration Mode and Install Mode.
In the Configuration Mode, the operator configures the parameters required for standard
operation. In the Installation mode, the installer configures the parameters required for
installation of the antenna and/or repair work.
Figure 7-1 ACU Front Keypad
7.1 Configuration Mode
This section will describe the configuration of the ACU.
7.1.1 Key Mapping
The following table provides a quick reference source on Key Mapping of the ACU.
Key (Main Status) Action
1 CONFIG: SHIP LOCATION
2 CONFIG: SHIP HEADING
3 CONFIG: SAT. FINDING METHOD
4 CONFIG: POLARITY
5 CONFIG: S&T REF DETAILS
6 CONFIG: DVB TUNER
7 CONFIG: TEMP S&T REF TEST
8 CONFIG: YAW AXIS INITIALIZE
+/- CONFIG: SEARCHING ON/OFF
· CONFIG: TRACKING ON/OFF
▲
CONFIG
: STR ID
▼ STATUS of all searching and tracking references
Holding ‘
ß
’ 3 sec Go to INSTALLATION MODE
Holding ‘C ‘3 sec Monitor and Control using PC
Table 7-1 Key Mapping (Quick Reference)