In the following section the procedure to connect the instrument to the
PC using the crossover UTP cable is described. Configure the IP address
of the PC LAN network card by executing the following steps (in this
example Windows 7 OS is used, in Windows 8 the example screens may
look different):
1.
Right click on the Network icon in the bottom right of the Windows
taskbar and open the menu ‚Open Network and Sharing Center‘.
Alternative: open Windows start menu, open control panel and go to
‚Open Network and Sharing Center‘):
Fig. 6
Open Network and Sharing Center
2.
Open the menu ‚Change adapter settings‘ on the left panel of the
‚Open Network and Sharing Center‘ window.
3.
Right click on the Local Area Connection icon of the LAN card in your
PC and click on properties to open the Network card setting.
Fig. 7
LAN properties
13
Installation
AZURA® Detector ECD 2.1 Instructions, V6685
Summary of Contents for Azura ECD 2.1
Page 1: ...HPLC Detector ECD 2 1 Instructions Document No V6685 ...
Page 32: ...28 ECD 2 1 controller AZURA Detector ECD 2 1 Instructions V6685 Pulse mode ...
Page 33: ...29 ECD 2 1 controller AZURA Detector ECD 2 1 Instructions V6685 Scan mode CONFIC menu ...
Page 34: ...30 ECD 2 1 controller AZURA Detector ECD 2 1 Instructions V6685 DIAG menu ...