42
Installation
Accessories
Steps
Important Information
Electrical connection
Turntable
Wire rack
Glass tray
1. Carefully push the oven into the box, making sure
that it is in the centre.
2. Open the door and fasten thewith the screws that
were supplied.
• Fully insert the appliance and centre it.
• Do not kink the connecting cable.
• Screw the appliance into place.
• The gap between the worktop and the appliance
must not be closed by addtional battens.
• Never use the microwave without the turntable.
• The turntable can withstand max. 5 kg.
• The turntable must turn when using all types of hea-
ting.
• Food which particularly requires a lot of heat from
underneath can be prepared directly on the turntable.
• The turntable can turn clockwise or anti-clockwise.
Place the turntable on the drive in the centre of the
cooking compartment. Ensure that it is properly
fitted.
• For the microwave and for
baking and roasting in the
oven.
The appliance is fitted with a plug and must only be connected to a properly
installed earthed socket.
Only a qualified electrician who takes the approriate regulations into account
may install the socket or replace the connecting cable. If the plug is no longer
accessible following installation, an all-pole isolating switch must be present
on the installation side with a contact gap of at least 3 mm. Contact protection
must be ensured by the installation.
Fuse protection: see instructions for use-technical data.
!
!
Summary of Contents for EBM4502S
Page 31: ...DE...
