78
Care and cleaning
Care and cleaning
• For cleaning, don’t use steam cleaners.
• Before cleaning the machine, let it cool down and un-
plug from the mains.
• Don’t use abrasive cleaning agents, abrasive scourers
or sharp objects.
Case front
•
Only use commercially available agents according to the
manufacturer‘s instructions for cleaning and maintenance
of the front surfaces.
•
Stainless steel surfaces can be cleaned and wiped dry with
mild detergents (eg soap) and a soft cloth.
•
Aggressive cleaning agents (eg vinegar-based cleaners),
abrasives, abrasive grit and sharp objects will damage the
surface of the appliance!
Oven interior
•
Der Garraum lässt sich leichter reinigen, wenn er noch
handwarm ist.
•
Remove simple grease splashes with rinse water.
•
Use conventional oven cleaner for stubborn or severe
soiling. Rinse thoroughly with cold water to remove all
cleaning agents are removed completely.
•
When using oven sprays, observe the manufacturer‘s
instructions. Painted, anodized, galvanized surfaces, alu
-
minum parts and radiators may not come in contact due to
possible damage and discoloration with these sprays.
•
Clean the accessories such as baking tray, drip pan, grate,
etc. with hot water and a little detergent.
SteamClean method
This function facilitates the oven cleaning essentially, be
-
cause the dirt can be solved more easily by water vapor and
heat.
•
Remove any accessories such as roasting pan, baking sheet
and rust.
•
Pour down about 0.4 liters of water with a little detergent
into the trough of the soil.
•
Close the oven door. Select bottom heat heating at 50 °C.
•
Switch off the appliance after about 30 minutes and discon
-
nect the power. Remove soaked food debris with a cloth.
•
For baked-on soils, note the previous cleaning instructions.
Removing the oven door
•
Fold down the oven door to the horizontal position.
•
Lift the bracket on the two door hinges to the front.
•
Slowly close the oven door until it stops.
Then lift the door until the hinges disengage.
•
The insertion is carried out in reverse order.
At last, swing the lever back to the hinge support.
!
Hinge support
Clip
