56
Using the induction hob
If the display flashes
alternately with
the heat setting - This means that:
•
You have not placed suitable cookware on the correct
cooking zone or,
•
the cookware you’re using is not suitable for induction
cooking or,
•
the diameter of the cookware is too small or it is not
properly centred on the cooking zone.
No heating takes place unless there is suitable cookware
on the cooking zone. The display will then automatically
turn off after 1 minute.
3.
Touch the desired heating zone selection control.
A digital display on the touch field lights up.
4.
Adjust the heat setting by moving your finger over
the slider control or tap the desired intensity level di
-
rectly on the slider bar.
•
If you don’t choose a heat setting within 1 minute,
the ceramic hob will automatically switch off.
You will need to start again at step
1
.
•
You can modify the heat setting at any time during
cooking.
•
You can modify the power level from 0 to 9 by the
slider control.
power up
power down