61
EN
15
Verwendung des Timers
4.
Berühren Sie die Timer-Taste noch-
mals – die 1 wird nun blinken.
5.
Nun können Sie mit dem Slider die 10
– 90 (Zehner) einstellen. In diesem Fall
95 Minuten.
6.
Wenn die Zeit eingestellt ist, wird der Timer sofort automatisch star-
ten. Das Display wird nun die Restzeit anzeigen und nicht mehr blinken.
Hinweis:
Der rote Punkt neben der Kochzoneneinstellung zeigt
an, welche Kochzone ausgewählt wurde.
Warnung:
Kochzonen ohne aktivierten Timer bleiben weiterhin in Betrieb.
5.
Wenn die Zeit eingestellt ist, wird der Timer sofort automatisch
starten. Das Display wird nun die Restzeit anzeigen und nicht mehr
blinken.
6.
Wenn die Zeit abgelaufen ist, wird ein Piep-Signal für 30 Sekunden
ertönen und die Anzeige „00“ abbilden.
7.2 Einstellung des Timers, um eine oder mehrere
Kochzonen
auszuschalten
Einstellen des Timers auf einer Kochzone
1.
Wählen Sie zunächst die Kochzone aus, bei der Sie den Timer
aktivieren wollen (Berühren des Kochzonen-Kontrollfeldes).
3.
Stellen Sie die Minutenzeit 0-9 durch
das Schieben der Slider-Steuerung ein.
2.
Betätigen Sie die Timer-Taste – „10“
erscheint im Display, wobei die „0“
blinkt.
7.
Wenn die Zeit abgelaufen ist, wird die Kochzonenanzeige „00“
abbilden und die ausgewählte Kochzone automatisch ausschalten.
!
DE
Using the timer
4.
Touch the timer control again, the “1”
will flash.
5.
Set the first digit of the countdown time
by touching the slider control (e.g.9,
now the timer you set is 95 minutes).
6.
When the time is set, the countdown will start immediately.
The display will show the remaining time
NOTE:
The flashing red dot next to power level indicator
will indicat the zone which is selected.
Other cooking zone will keep operating if they are turned on previously.
7.2 Setting the timer to turn one or more cooking
zones off
If the timer is set on one zone:
1.
Touch the heating zone selection control
that you want to set the timer for.
3.
Set the second digit of the countdown
time by touching the slider control. (e.g. 5)
2.
Touch timer control, the timer display
will show „10“ and the „0” will flash.
7.
When cooking timer expires, the corresponding
cooking zone will be switch off automatically.
!
5.
When the time is set, the countdown will start immediately.
The display will show the remaining time
6.
When the setting time finished, the buzzer will beep for 30 se
-
conds and the timer indicator shows “00“ .
15
Verwendung des Timers
4.
Berühren Sie die Timer-Taste noch-
mals – die 1 wird nun blinken.
5.
Nun können Sie mit dem Slider die 10
– 90 (Zehner) einstellen. In diesem Fall
95 Minuten.
6.
Wenn die Zeit eingestellt ist, wird der Timer sofort automatisch star-
ten. Das Display wird nun die Restzeit anzeigen und nicht mehr blinken.
Hinweis:
Der rote Punkt neben der Kochzoneneinstellung zeigt
an, welche Kochzone ausgewählt wurde.
Warnung:
Kochzonen ohne aktivierten Timer bleiben weiterhin in Betrieb.
5.
Wenn die Zeit eingestellt ist, wird der Timer sofort automatisch
starten. Das Display wird nun die Restzeit anzeigen und nicht mehr
blinken.
6.
Wenn die Zeit abgelaufen ist, wird ein Piep-Signal für 30 Sekunden
ertönen und die Anzeige „00“ abbilden.
7.2 Einstellung des Timers, um eine oder mehrere
Kochzonen
auszuschalten
Einstellen des Timers auf einer Kochzone
1.
Wählen Sie zunächst die Kochzone aus, bei der Sie den Timer
aktivieren wollen (Berühren des Kochzonen-Kontrollfeldes).
3.
Stellen Sie die Minutenzeit 0-9 durch
das Schieben der Slider-Steuerung ein.
2.
Betätigen Sie die Timer-Taste – „10“
erscheint im Display, wobei die „0“
blinkt.
7.
Wenn die Zeit abgelaufen ist, wird die Kochzonenanzeige „00“
abbilden und die ausgewählte Kochzone automatisch ausschalten.
!
DE