74
Using the appliance
Clock setting
After connecting the unit to the power, the symbols 0:00
will be visible on the display.
Setting the current time
•
Press the button. The hour digits will flash.
•
Press
and to set the current hour.
•
Press the button again. The minute digits will flash.
•
Press
and
to set the current minute.
•
Press the button again to finish the clock settings.
The display „:“ will flash and the time will be displayed
constantly.
Hints
•
The clock is set in 24-hours-format.
•
If the circuit is interrupted, the clock is reset to 0.
Selection of the heating type
•
Press
repeatedly until the related indicator of your
desired heating function will be displayed.
•
Press
and
, to set the cooking time.
Note:
The time is set as follows:
0 – 0:30 min: in 1-minute steps
0:30 min – 9:00 hours: in 5-minutes steps
•
Then you can press the button to set the cooking and
the and
keys, you can adjust the temperature.
Note:
The temperature is set in 5 °C steps.
•
Press to confirm and to start operation.
The standard cooking time is 9 hours.
Modifying the temperature or time while cooking
•
Press the button. The icon will be displayed.
•
With the
und
keys, you can now adjust the temperature.
•
Press the button again. The icon will disappear.
•
Now you can adjust the time using the
und keys.
•
Confirm your setting(s) by pressing the button.
Time inquiring
During the cooking process, it is possible to switch
between the cooking time display and the clock display.
•
Use the button to display the cooking time, if set.
•
If the clock was set, press button again to switch back
to the display of the cooking time.
Reminder function
The oven has a 9-hours-reminder, this function will help
you to remind to start cooking in a certain time from 1
minute to 9 hours. Only when oven is in standby mode,
the reminder can be set.
•
Press the reminder setting button
.
•
To set the reminder countdown, press
and .
•
Press to confirm setting. „:“ will flash and the indicator
for the reminder
will light up. Now the time counts
down.
Note:
The oven buzzer will sound for 10 times after the
time back to zero hour .
symbol disappears
on the screen to remind you to start cooking. You
can cancel the reminder during setting by pressing
the stop button; After the reminder has been set,
you can cancel it by pressing stop button twice.
Setting an end point of the cooking time
This function only can be used, if the clock has been set.
•
In standby mode, press the button 2 times, so that the
display shows and “End”.
•
Press the
and
buttons to set the target hour for the
end of the cooking time.
•
Press the button again.
•
Use the
and
buttons to set the target minute.
•
Set the heating function you require using the button.
•
After setting a temperature if needed, press
to start
operation.
•
When the cooking process will be complete / When the set
target time will be reached, a beep signal will sound 5 times.
Note:
After starting this function, the clock, the
icon
and „End“ is displayed.
By pressing the button you can inquire the set
end time (Display duration 3 min).
Setting and programming
