75
EN
Using the appliance
General operating notes
•
The oven light is turned on in all heating functions, except
with the ECO function.
•
When you have selected a heating function, but the
button is not pressed within 5 minutes, the current time
will be displayed (waiting state).
The selected function will be recognized as invalid.
•
To confirm that your input was detected from the Sensor
-
Touch control panel, the appliance emits a beep signal
each time a button is pressed.
Oven lighting
•
In standby mode, press the button to switch the lighting
on and off.
•
During the setting process of the functions, the lighting is
turned off by default and turns on at the start of operation
(except in ECO mode).
•
To turn off the lighting during operation, press the
button
.
To switch it on again, press it again. (Not valid for ECO mode)
Child lock / key lock
Locking the control panel:
• Keep the and
buttons pressed for 3 seconds.
A long beep will sound and the will be displayed
indicating the control panel is locked.
Unlocking the control panel:
•
Press the same key combination again – the child lock will
be released.
Note:
Even when the key lock is activated, you can still
cancel the cooking process by briefly pressing the
button.However, pressing the key too long will be
interpreted by the appliance as invalid.
Energy saving function
•
During in waiting state and reminding state, keep the
button pressed for 3 seconds. The appliance will switch
to energy-saving mode and the display illumination will
switch off.
• If there
’
s no operation within 10 minutes in waiting state,
the energy saving mode is also activated and the display is
switched off.
•
To quit the energy-saving mode, press any key.
Start / Pause / Cancel-Standby
•
You can start working mode by pressing
.
•
Pausing is possible by pressing the button.
•
By pressing the button two times, you can cancel
the working mode and turn the oven to stand-by-
mode.
