9
Arpeggiator
Latch Switch
The Latch Switch is used to switch
between the ARP Mode & SEQ
Mode. When the Latch Switch is
towards the keys the Kiwisix is in
SEQ Mode.
The Arp button light will flash when
the Kiwisix is in SEQ Mode.
Chord Mode
It is possible to arpeggiate a
chord. This is achieved by first
setting a chord as described in the
Chord Section and then starting
the Arpeggiator
Sequencer Mode
It is possible to arpeggiate a
sequencer outout. This is achieved
by first starting a sequence
running and then starting the
Arpeggiator.
Mode Switches
The Arp mode switches are stored
as part of the tone. Because of this
it is possible the Arp behaviour
might not match the Arp switch
settings on the panel.
Changing an Arp switch will set the
mode to the switch setting. This can
then be saved with the tone if
desired.
Clock Division
The Arp is run from the Master
Clock and this clock is divided by
the Arp clock division parameter.
This parameter is located under
button 8 in the global parameter
edits. It is still a tone parameter
and is saved with the tone.
Possible arp division types are
Half Note (48/Step)
Quarter note (24/Step)
8th note (12/Step)
8th note, 1/2 swing (14,10/Step)
8th note, full swing (16,8/Step)
8th note triplets (8/Step)
16th note (6/Step)
16th note, 1/2 swing (7,5/Step)
16th note, full swing (8,4/Step)
16th note triplets (4/Step)
32nd note (3/Step)
32nd note triplets (2/Step)
64th note triplets (1/Step)
www.kiwitechnics.com
KiwiSix Upgrade User Manual v3
