20
Setting up with External Devices
External Clock
The external clock input on the rear
of the Polysix synth will override the
internal clock if anything is plugged
into this input. This is a mechanical
switch and cannot be overridden in
the firmware.
Any clocks fed into this input will be
divided by the Arp & Seq clock
divider settings.
Midi Notes
Midi though should be used if
multiple units are being used on the
midi chain to reduce delays. While
every effort has been made to make
the midi as fast as is possible within
the KiwiTechnics KiwiSix upgrade
there will always be small delays
between the midi input and midi
output as the commands need to be
interpreted which cannot be done
until a full command arrives. Full
midi command details are at the end
of the manual.
Hold Pedal
Any pedal that shorts the tip to ring
when pressed can be used. It will
need to short when pressed to suit
the Korg PolySix hardware. A
hardware mod needs to be made to
the PolySix voice board to allow a
HOLD pedal to be used. Details are
in the install section of this manual.
www.kiwitechnics.com
KiwiSix Upgrade User Manual v3
