28
Adjustments for the PolySix
THE POLYSIX WILL BE ON WITH THE LID OPEN DURING THIS
THE POLYSIX WILL BE ON WITH THE LID OPEN DURING THIS
PROCEDURE AND THERE ARE LETHAL VOLTAGES PRESENT!
PROCEDURE AND THERE ARE LETHAL VOLTAGES PRESENT!
LEAVE THIS TO A PROFESSIONAL IF YOU ARE AT ALL UNSURE.
LEAVE THIS TO A PROFESSIONAL IF YOU ARE AT ALL UNSURE.
The Korg Polysix can be adjusted and retuned while it is apart. To do the adjustments you will require an accurate digital voltage meter, an oscilloscope , a small
screwdriver and something to measure tuning. I can recommend AP Tuner (http://www.aptuner.com) for windows based computers. The Polysix voices are cyclic.
The same note replayed will choose the next voice to sound. It is done this way so that note release times are not chopped off when the next note is played. The
voice that is currently being gated is shown by a red led on the voice board.
1) Warm up the Polysix
Leave the Polysix running for at least 15 minutes with the top closed to let the electronics stabilize. Set the front panel to the Normal setting. Also center the
Tune Knob and set Bend Intensity to 0.
www.kiwitechnics.com
KiwiSix Upgrade User Manual v3
