10
Key Transpose
The KiwiSix can transpose the
keyboard to any key up two octaves
or down one octaves (three octaves in
total)
This is done by switching the TAPE
switch to the on position so that the
LED is on and then pressing the
desired key on the keyboard.
The Unison & Poly button LEDs will
now show the current transpose as
follows
-1 Oct
- Unison Flashing Slow
Off (middle C) - Unison & Poly On
steady
+1 Oct
- Poly Flashing Slow
+2 Octs
- Poly Flashing Fast
Note - if the tape switch is on when
the KiwiSix is powered on this will be
ignored. You will need to switch it off
and then on again to edit the Key
Transpose.
To cancel KeyTranspose select
middle C so that both the Unison &
Poly Lights are one without blinking.
To exit Key Transpose mode switch
off the TAPE switch so that the light
is off.
Midi Notes
Valid Midi data received will flash the
Chord light.
Midi Panic
The Poly and Unison buttons will also
act as midi Panic buttons and will stop
all midi sound.
www.kiwitechnics.com
KiwiSix Upgrade User Manual v3