50
Table 1.0 Command ID
Data Byte
Data Type
Byte details
7 ------- 0
Data Details
$09 (9) Request Seq Dump
Seq Number
Sequence Number
0000xxxx
x =
0-7 for Sequence 1-8
Juno-106 transmits a $0a (10) command
WARNING! This command will overwrite the
current sounding Seq with the
Seq selected
$0a (10)Transmit / Receive Seq
Dump
Seq 1800 data bytes
Sequence Number
0000xxxx
x =
0-7 for Sequence 1-8
WARNING! This command will overwrite the
current sounding Seq with the
Seq selected
$00-$13 (0-19) = Seq Name
20 Ascii Bytes
Sequence Name
$14 (20) = Seq Length
0xxxxxxx
x =
0 = No Seq Recorded
1-124 = No of Seq Steps
$15-$2e (21-46) = Reserved
26 bytes Reserved for future expansion
$2f-$67b (47-1659) = Seq Steps
124 x 13 (1612)
Note 1 0xxxxxxx
Note 2 0xxxxxxx
Note 3 0xxxxxxx
Note 4 0xxxxxxx
Note 5 0xxxxxxx
Note 6 0xxxxxxx
Byte 7 00abcdef
Byte 8 0xxxxxxx
Byte 9 0xxxxxxx
Byte 10 0xxxxxxx
Byte 11 0xxxxxxx
Byte 12 0xxxxxxx
Byte 13 0xxxxxxx
Step is 13 bytes
Byte 1-6 xxxxxxx = note number (32-96)
Note Bytes are $00 (0) if not used
Byte 7 a-f is tie bits 1-6 (set if tie set)
Byte 8-13 xxxxxxx = voice 1-6 Level (0-127)
$0b (11) Request Tone Name
Bank + Tone
$00 (0) = Bank Number
00000xxx
Select Tones = 0 for tones 1-128
1 for tones 129-256
2 for tones 257-384
3 for tones 385-512
WARNING! This command will overwrite the
current sounding tone with the
Tone selected
$01 (1) = Tone Number
0xxxxxxx
x =
0-127
Kiwisix transmits data in the same format as the $0c
(12) Command
www.kiwitechnics.com
KiwiSix Upgrade User Manual v3
