KINOVA
®
Communication system
User Guide
34
Setting up the communication system
This section describes the installation procedure for the communication system.
About this task
Setting up the communication system consists of three steps:
Procedure
1.
Installing the Operator Adapter
2.
Installing the Remote Adapter
3.
Establishing a communication link
Mounting a communication adapter
This section describes how to mount a communication adapter onto a flat surface.
About this task
The communication adapters come with mounting flanges for mounting with screws to a
stable surface.
Note:
When not in use, the USB connectors on the communication adapters (gamepad
connectors) must be plugged with the provided plug when not in use. This is to guard against
water ingress in the connectors.
Procedure
1.
At the desired mounting location, mark, drill four M5 holes into a flat, horizontal mounting
surface according to the hole pattern of the Communication Adapter flanges.
Figure 14: Communication Adapter mounting holes (all measurements in mm)