KINOVA
®
Communication system
User Guide
31
•
username
- set username for the radio
•
IP_address
- identify internal IP address used for the radio (setting the IP address in
the radio itself is done in the radio CLI, accessible via
advanced radio configure
•
configure
- opens Z9-PC radio manufacturer (FreeWave) CLI shell
•
hard_config_reset
- this will reset the communication adapter to pre-production (un-
configured) settings. You will be prompted to confirm before proceeding.
Note:
This option provides more than a simple factory reset rollback, and needs to be
followed up with manual reconfiguration of the communication adapter. Ensure that you
understand the consequences before using this option, which should only be used as a last
resort if a factory reset does not work.
IP network menu
The section describes the
IP_network
menu for the CLI application.
The
IP_network
menu is for configuring IP / network settings for the nodes on the
communication network. The menu offers three options:
•
Local
- configures the IP settings for the network interfaces of the communication adapter to
which you are connected.
•
Remote
- specifies the IP address and port settings of the other communication adapter, so
that communications can be established using the available interfaces:
•
get_info
- returns information about the IP settings of the communication adapter, as well
as its MAC address.
Local adapter IP configuration menu
This section describes the
local
menu for the CLI application, which is used for
configuring IP settings for the communication adapter to which you are connected.
