KINGFISHER
O W N E R ’ S M A N U A L
w w w . k i n g f i s h e r b o a t s . c o m
50
Head (Toilet):
The water supply for the head is drawn via a ball valve fitting directly from the outside
water. To operate the head,
Before use, make sure that there is enough water in the toilet bowl to prevent the
toilet paper becoming compacted at the bottom of the bowl. To do this:
Open the water pick up ball valve which is clearly labelled and located in the bilge of
the boat, behind the fuel tank
Ensure that the Flush Control Lever is set to open
Pump the toilet handle with long smooth strokes until adequate water has flown into
the toilet bowl
During use, pump as necessary to keep contents of the bowl low enough for comfort
Pump as much water in the bowl as necessary to flush the contents into the holding
tank
Once the toilet bowl is clear, close the ball valve and turn the Flush Control Lever to
the closed position
Pro series head option.
The Pro series head system compone
nts including the toilet, ‘Y’ valve and waste tank
are contained within the same seat box. The macerator pump is bolted to the back of
the seat box.
The Pro series head option operates in the same way as the system as the weekender
package head systems.
The macerator switch is located in the top RH corner of the head box next to the ‘Y’
valve handle. The waste tank capacity in the Pro series head is 6 gallons.
The water pick up is clearly marked and located beneath the bilge doors in the stern of
the boat.
The Pro head water pick up line has been fitted with a one way check valve. This check
valve is located on the water pick up line close to the ball and should be cleaned and
serviced annually.
