Rhino
Robot
3
User Manual
31/32
Kinematiq SAS 2015-2020. All Rights Reserved.
Running a collision check
In the export tab you can click to run a collision check.
A list of potential problems will be displayed underneath at the end of the check. In this collision check, you have
the possibility to add any chosen geometry that will be tested for collision with the tool.
Note that the robot itself, the tool and the external axis geometry are already included in this collision check.
As it tests every single simulation step for collision, this check can take very long, depending on the length of your
toolpath and computer power.
Summary of Contents for RhinoRobot3
Page 1: ...RhinoRobot3 User Manual...
