Rhino
Robot
3
User Manual
14/32
Kinematiq SAS 2015-2020. All Rights Reserved.
Setting up external axes
Please repeat the general process of the previous section (setting up a tool): import your geometries, set them in
place and then create a block with (Rhino World 0) as the base point. Name it appropriately (RR_E1 or RR_E2 more
coming on this subject), set up a dedicated named CPlane RR_E1 or RR_E2.
You can configure one or two external axes, which can be linear for one and rotary for the other, or two linked
rotary axes.
Linear axis
The linear axis has to be named RR_E1 since RR_E2 is a fixed rotary axis (as in the above image).
The linear axis must move along the y axis (green) direction of the named CPlane.
Summary of Contents for RhinoRobot3
Page 1: ...RhinoRobot3 User Manual...
