Kilsen KFP-CX3E Series, Installation Manual

Page: 8 / 112

Chapter 1: Introduction
2 KFP-CX3E Series Installation Manual
Product description
The KFP-CX3E Series control panel provides three fire detection zones (Z1, Z2,
and Z3) and several manual call point (MCP) and control inputs that control the
extinguishing actions for a single extinguishing area.
If a fire detection zone is not configured as part of the extinguishing detection
area, the control panel provides standard fire panel functionality for that fire
detection zone (for example, the panel activates fire sounders, fire routing, and
other auxiliary outputs).
Product compatibility
Products compatible with this control panel are listed in the supplied compatibility
list. Compatibility with products that are not listed in that document cannot be
guaranteed. For further details contact your local supplier.
Note: The CleanMe self-diagnostics feature listed in selected presets is not
available for KFP-CX3E Series devices.
Operating modes
Supported operating modes are shown in the table below. The default operating
mode is EN 54-2 (with EN 54-13 supervision disabled).
Table 1: Operating modes
Operating mode EN 54-13 option [1] Region
EN 54-2 (default) Yes [2] European Union
BS 7273 No United Kingdom
Repeater with fire routing (EN 54-2)
No
European Union
Repeater with fire routing (BS 7273)
No
United Kingdom
[1] EN 54-13 supervision requires compatible system wiring and devices and must be enabled by
the installer in the control panel configuration.
[2] EN 54-13 supervision is available in zones and expansion board outputs.