Kilsen KFP-CX3E Series, Installation Manual

Page: 46 / 112

Chapter 3: Configuration and commissioning
40 KFP-CX3E Series Installation Manual
Display Menu Values
Firenet initial zone number
0001 to 9999
Default: 0001
The number has four digits. Identified
by position, these are: 1234.
Press Up to enter the first two digits of
the number (positions 1 and 2).
Press Down to enter the last two digits
of the number (positions 3 and 4).
Firenet global controls ON/OFF
Default: On
Firenet loop class A/ B
Default: B
Process remote zones ON/OFF
Default: On
Firenet map 01 to 32
ON/OFF
On for nodes 1 and 2, Off for the rest
Firenet repeater map 01 to 32
ON/OFF
On for nodes 1 and 2, Off for the rest
Firenet analogue repeater remote node ON/OFF
Default: Off
Firenet remote output control ON/OFF
Default: Off
Extinguishing Firenet global controls ON/OFF
Default: Off
Software version Read-only
Configuration version Read-only
Configuration time stamp Read-only
Configuration date stamp Read-only
Zone configuration
Passive EOL
Active EOL
Passive EOL with CleanMe
Active EOL with CleanMe
Intrinsically safe
Zenner EOL
Unlatched (only for BS 7273 mode and
fire zones)