Kikusui TOS3200, User Manual

Page: 40 / 130

40
TOS3200
Connecting the EUT
Using the Output on the Front Panel
Connect the power cord of the EUT to the outlet (AC LINE OUT) on the front panel.
Fig. 4-1 Connection for the PCC measurement
The outlet on the front panel is a NEMA5-15 outlet for 100-V systems. However, if the plug
cannot be connected physically (as may be the case with some AC adapters), use a power
strip or the like.
p. 40
Use the terminal block on the rear panel to connect a plug for 200-V systems. You can con-
nect many of the popular plugs around the world by connecting the optional multi outlet to the
terminal block.
Using the Terminal Block on the Rear Panel
If the power cord plug of the EUT does not match the output on the front panel, use the AC
LINE OUT terminal block on the rear panel.
The outlet and the terminal block are connected in parallel inside the TOS3200. Do not con-
nect EUTs to both the outlet and the terminal block at the same time.
To connect a EUT of class 0I, connect
the ground wire to the ground terminal.
Ground terminal
Be sure to use the ground terminal
with the binding post cover.
WARNING
Electric shock may occur. In case of measuring the touch current in the condition of
“Earth line disconnected status” of the EUT, a hazardous voltage may apply to the
ground terminal. Do not touch the ground terminal while the test is in progress.
See