Kikusui PWX1500H, User Manual

Page: 14 / 131

14
PWX
Connecting the Power Cord
 Connection procedure
1
Check that the AC power line meets the nominal input rating of the prod-
uct.
The product can receive a nominal line voltage in the range of 100 Vac to 240 Vac at
50 Hz or 60 Hz.
2
Check that the POWER switch is turned off.
3
Connect the power cord and the included INPUT terminal cover to the
AC INPUT terminal on the rear panel.
Be sure to connect the AC INPUT L, N, and (GND) terminals correctly.
Pass the power cord through the INPUT terminal cover, and fix the cord in place using
the lock plate and screws.
Use the PWX screws to connect the INPUT terminal cover in place.
4
Attach an appropriate crimping terminal to the switchboard end of the
power cord.
5
Turn off the switchboard breaker.
6
Connect the L, N, and (GND) wires of the power cord to the matching
terminals on the switchboard.
INPUT terminal cover
Power cord
Screw
N
L
（
GND
）
Secure the insulated section
of the power cord in place
with a lock plate.
INPUT terminal cover
Lock plate
Lock plate
AC INPUT terminal
L: Black or brown
N: White or blue
(GND): Green or
green and yellow