Kikusui PWX1500H, User Manual

Page: 100 / 131

100
PWX
PWX750LF/ PWX750MLF/ PWX750MHF/ PWX750HF
Interface
Common
Common
specifications Software protocol IEEE Std 488.2-1992
Command language Complies with SCPI Specification 1999.0
Has a compatibility mode (switchable)
1
• Genesys series made by TDK-Lambda
• N5700 and N8700 made by Agilent Technologies
• DSC series made by Sorensen
• PAG series made by Kikusui
1 This setting does not guarantee compatibility with all measuring instrument application software and drivers.
RS232C Hardware Complies with the EIA232D specifications (excluding the connector)
RJ-45 connector
2
2 The RD-8P/ 9P adapter cable is an option.
Baud rate: 1200, 2400, 4800, 9600, 19200, 38400, 57600, and
115200 bps
Data length: 8 bits, Stop bits: 1 bit, Parity bit: None
No flow control
Program message terminator LF during reception, CR/LF during transmission
USB Hardware Complies with the USB 2.0 specifications.
Baud rate: 480 Mbps (High speed).
Socket B type
Program message terminator LF or EOM during reception, LF + EOM during transmission
Device class Complies with the USBTMC-USB488 device class specifications
LAN Hardware IEEE 802.3 100Base-TX/10Base-T Ethernet
Complies with the LXI Specification Ver.1.3 Class C.
IPv4, RJ-45 connector
3
3 Category 5; use a straight cable.
Communication protocol VXI-11, HiSLIP, or SCPI-RAW
Program message terminator VXI-11 and HiSLIP: LF or END during reception, LF + END during
transmission
SCPI-RAW: LF during reception, LF during transmission