Kikusui PWX1500H, User Manual

Page: 99 / 131

PWX
99
PWX750LF/ PWX750MLF/ PWX750MHF/ PWX750HF
6
S
pe
cificati
ons
Control features
Other features
Common
External
control
1
1 J1 connector on the rear panel
Output voltage control (VPGM) 0 % to 100 % of the rated output voltage
Selectable control voltage range: 0 V to 5 V or 0 V to 10 V
Accuracy 5 % of rtg
Output current control (IPGM) 0 % to 100 % of the rated output current
Selectable control voltage range: 0 V to 5 V or 0 V to 10 V
Accuracy 5 % of rtg
Output on/off control
OUTPUT ON/OFF CONT Possible logic selections:
Turn the output on using a LOW (0 V to 0.5 V) or short-circuit, turn the
output off using a HIGH (4.5 V to 5 V) or open-circuit.
Turn the output on using a HIGH (4.5 V to 5 V) or open-circuit, turn the
output off using a LOW (0 V to 0.5 V) or short-circuit.
Output shutdown control
SHUT DOWN Turns the output off with a LOW (0 V to 0.5 V) or short-circuit.
Alarm clear control
ALM CLR Clears alarms with a LOW (0 V to 0.5 V) or short-circuit.
Common
Master-slave parallel operation Including the master unit, up to four units (all the same model) can be
connected.
Series operation
1
1 Excluding the PWX750HF
Up to two units (all the same model) can be connected.
Preset memory Up to three sets of the following settings can be saved: the set voltage,
the set current, the set OVP, the set OCP, and the set UVL.
Key lock Locks the operation of all keys other than the OUTPUT key.
Multichannel
(VMCB) Between master unit and PC LAN, USB, RS232C
Slave unit LAN