Kikusui OT01-PCR12000LA/2 Operation Manual Download

Page: 77 / 96

OT01-PCR-LA/2

Single-phase, Three-wire Operation 6-13

6.11.2 Output Voltage Setting Messages

VSET/ACVSET

Sets or inquires about the phase voltage.
The VSET message and ACVSET message function in the same way.
In output voltage setting, all phase voltages are set to the same value.
These messages are enabled in the phase voltage display mode.

Program message

• Syntax

Command message:

VSET <NR2>
ACVSET <NR2>

Query message:

VSET?
ACVSET?

• Program data

Same as that of single-phase operation

Response message

Returns a phase voltage set value in response to VSET?/ACVSET?

LINEVSET

Sets or inquires about the line voltage.
This message is enabled in the line voltage display mode.

Program message

• Syntax

Command message:

LINEVSET <NR2>

Query message:

LINEVSET?

• Program data

Twice the voltage set by the VSET/ACVSET message can be set.

Response message

Returns a line voltage set value in response to LINEVSET?

Summary of Contents for OT01-PCR12000LA/2

































































































Search results

Summary of Contents for OT01-PCR12000LA/2

Reviews:

Related manuals for OT01-PCR12000LA/2

Brands by name

Popular brands

Kikusui OT01-PCR12000LA/2, Operation Manual

Search results

Summary of Contents for OT01-PCR12000LA/2

Reviews:

Related manuals for OT01-PCR12000LA/2

Brands by name

Popular brands