2-6 Installation and Preparation for Use
OT01-PCR-LA/2
2.2
Precautions on Installation
Be sure to observe the following precautions when installing the product.
■
Do not use the product in a
fl
ammable atmosphere.
To prevent explosion or
fi
re, do not use the product near combustible materials such
as alcohol or thinner, or in an atmosphere containing such vapors.
■
Avoid locations subject to high temperatures or exposed to
direct sunlight.
Do not locate the product near a heater or in areas subject to drastic temperature
fl
uctuations.
Operating temperature range: 0 °C to 40 °C
■
Avoid humid locations.
Do not locate the product in a high-humidity location such as near a boiler, humidi-
fi
er, or water supply.
Operating humidity range: 20 % to 80 % RH (no condensation allowed)
Storage humidity range: 90 % RH or less (no condensation allowed)
Condensation may occur even within the operating humidity range. In such a case,
do not start using the product until it is completely dry.
■
Do not install the product in a corrosive atmosphere.
Do not install the product in a corrosive atmosphere or one containing sulfuric-acid
mist or the like, as doing so may cause corrosion of conductors or improper connec-
tor contacts in the product, resulting in a malfunction or failure that could poten-
tially lead to a
fi
re.
However, modi
fi
cation may allow the product to cope with such an atmosphere. If
the product is to be used in such an atmosphere, consult your Kikusui distributor/
agent.
■
Do not locate the product in a dusty environment.
Dirt and dust in the product may result in electric shock or
fi
re.
■
Do not place any object on the Output Terminal.
Heavy objects, in particular, placed on the product could lead to a malfunction.
■
Do not install the product on a tilted surface or in a location
subject to vibration.
The product may fall, resulting in damage or injury.
■
Do not use the product in locations affected by strong mag-
netic or electric
fi
elds, or where it will be exposed to waveform
distortion or noise in the input power.
Placing the product in such a location may result in a malfunction.
Summary of Contents for OT01-PCR12000LA/2
