Kikusui OT01-PCR12000LA/2, Operation Manual

Page: 26 / 96

2-10 Installation and Preparation for Use OT01-PCR-LA/2
5. Install the cable clamper provided, and fi x the input power cable(s)
securely (Fig. 2-7).
Using the provided M4 screws, attach part (A) to the power supply.
In this case, place the wires of the provided input power cable or the provided
input cables in the groove(s) of part (A).
Using the provided M3 screws, install parts (B) and (C) to
fi x the individual
wires or the cables.
6. Put the cover removed in step 1 back on.
Fig. 2-6 Connecting the Input Power Cable(s) to the INPUT Terminal
Board
Cable Clampers
Fig. 2-7 Installing a Cable Clamper
• For crimp terminals to be installed on the PCR-LA power supply side, always use
those matching the size of the terminal screws for the PCR-LA power supply’s
INPUT terminal board.
• For the wire sizes of the cables to be used, see the instructions in the PCR-LA AC
Power Supply Operation Manual.
N L
N L
N L
N L
Green
White
Black
Green White Black White Black
PCR2000LA PCR4000LA, PCR6000LA
(GND)
(GND)
PCR2000LA
(A)
(B)
(C)
(A)
(B)
(C)
PCR4000LA
PCR6000LA