6-10 Single-phase, Three-wire Operation
OT01-PCR-LA/2
6.10.1 Switching between Phase Voltage and Line Voltage
Displays
The phase voltage display and line voltage display modes are provided for single-
phase, three-wire operation. The display mode will be backed up, and when the
POWER switch is turned ON, the display mode used immediately before the
POWER switch was turned OFF will be selected.
1.
Press the ESC key to select the Home Position.
2.
Press the PHASE (SHIFT, 2) key.
This procedure alternately switches between the phase voltage display and line
voltage display.
Phase Voltage Display Mode
• The
symbol at the left of the voltage display area on the LCD indicates that the
phase voltage display mode is selected.
Line Voltage Display Mode
• The symbol at the left of the voltage display area on the LCD indicates that the
line voltage display mode is selected.
• Setting the voltage in the line voltage display mode allows line voltage setting.
• The line voltage display mode disables measurement of output power.
6.10.2 Displaying the V-Phase Current and Voltage
1.
Press the ESC key to select the Home Position.
2.
Press the MENU key. Each time this key is pressed, the display
changes as follows.
For the phase voltage display mode:
5 0 . 0 0 H z
0 . 0 0 A
0 . 2 V
F R Q
I
r m s
V r m s
5 0 . 0 0 H z
0 . 0 0 A
0 . 2 V
F R Q
I
r m s
V r m s
U-phase current and voltage
V-phase current and voltage
Total power, total VA, and total power factor of the two phases
Summary of Contents for OT01-PCR12000LA/2
