32
Assemble units as described herein only. To do otherwise
may result in instability. All screws, nuts and bolts must be
tightened securely and must be checked periodically after
assembly. Failure to assemble properly, or to secure parts
may result in assembly failure and personal injury.
2. Position two splice plates to
mounting holes at the underside
of the adjoining rectangular
worksurface. Secure splice plates
to worksurface with four
#12 x 1” screws, two per splice
plate (Figure 2).
3. Carefully set the peninsula
worksurface into position on the
splice plates. Align the mounting
holes and secure the peninsula to
the worksurface from underneath
with four #12 x 1” screws, two
per splice plate (Figure 2).
4. Level the peninsula worksurface
by turning the adjustable glide
on the single leg either in or out
(Figure 1).
WorkZone
®
Peninsula Worksurface
Assembly Instructions
5. Position two splice plates to mounting
holes at the underside of the adjoining
rectangular worksurface. Secure splice
plates to worksurface with four #12 x 1”
screws, two per splice plate (Figure 2).
3. Carefully set the peninsula
worksurface into position on the splice
plates. Align the mounting holes and
secure the peninsula to the worksurface
from underneath with four #12 x 1”
screws, two per splice plate (Figure 2).
4. Level the peninsula worksurface by
turning the adjustable glide on the single
leg either in or out (Figure 1).
WorkZone Peninsula Worksurface
#12 x 1"
screw
#12 x 1"
screw
splice
plate
splice
plate
peninsula
worksurface
peninsula
worksurface
front
edge
adjoining
rectangular
worksurface
adjoining
rectangular
worksurface
side
edge
Figure 2
Figure 3
Figure 2
Figure 3