18
Assemble units as described herein only. To do otherwise
may result in instability. All screws, nuts and bolts must be
tightened securely and must be checked periodically after
assembly. Failure to assemble properly, or to secure parts
may result in assembly failure and personal injury.
Tools Required
•
Phillips Screwdriver
•
Level
1. To avoid scratching the
worksurface, place the top face
down onto a soft protective
surface.
2. Attach two leg sets to worksurface
bottom by aligning legs to
pre-drilled holes and inserting
three #12 x 1
3
/
4
” screws per leg
set (Figure 1).
3. Position the corner leg over the
pre-drilled holes in the back
corner of the worksurface. Be
sure the modesty panel mounting
holes are oriented as shown.
Attach the corner leg to the
worksurface with four #12 x 1”
screws. Do not tighten at this
time (Figure 1).
WorkZone
®
Stand Alone Corner Worksurface with Keyboard Pad
Assembly Instructions
#12 x 1" screw
#12 x
#10 x ½" screw
leg plug
#12 x ½”Carriage bolt, washer and adjustment knob
adjustable
glide
adjustable
glide
corner leg
#12 x 1" screw
#12 x 1"
screw
corner
worksurface
#10 x ½" screw
#10 x ½"
screw
modesty panel
modesty panel
horizontal
wireway
(optional)
leg set
Figure 1
