KG ELS-304, Operation Manual

Page: 47 / 80

ELS-304
Operations for Meas. Modes 6-1
6. Operations for Meas. Modes
This product has three (3) Measurement Modes for Curr. Volt. and Power Meas.
There are two (2) Ranges, i.e. High and Low Ranges, for Curr. and Volt. Measurements,
enabling a user to measure accurately.
For ripple noise measurement, there is an optional RC-02 meas. module (Factory option).
6.1 Meas. Value Display
In this product, you can select two (2) items to be displayed.
To select display item, you can do the same way as explained in 4.2 to call a MEAS SETUP
menu.
(1) Change item of upper display
To change item of upper display,
Press “F1” key to display select item window.
Press “F1“ key or turn the rotary knob to select item.
Press “ENT” key or the knob to confirm the item.
Each item displayed presents the following:
・
VOLT-T Voltage at the terminal block
・
CURR Current
・
POWER Power
・
VOLT-I Voltage measured by the RC-02A module (optional)
・
NOISE Noise measured by the RC-02A module (optional)
・
RIPPLE Ripple measured by the RC-02A module (optional)
Note: RC-02A module can be provided by a factory option of this
product.
(2) Change item of lower display
To change item of lower display,
Press “F2” key to display select item window.
Press “F2 “key or turn the rotary knob to select item.
Press “ENT” key or the knob to confirm the item.
OR
F2
OR
F1