Keysight M9502A, User Manual

Page: 31 / 142

M9502A/M9505A AXIe Chassis
User Guide
21
2 Chassis Installation
This chapter begins where the Startup Guide leaves off, and provides the detailed
procedures for module installation and removal, bumper removal, rack mounting,
and module software installation.
Planning the Installation 22
Basic Chassis Verification 22
Complete Installation 22
Installing Modules 23
To Remove a Filler Panel Module 24
To Install a Module 24
To Remove a Module 28
Mounting the Chassis 29
Environmental and Power Considerations 29
Rackmounting the Chassis 29
Setting Up a Host PC 34
To Install Module Soft Front Panel and Device Drivers 34
Verifying Operation with Modules Installed 35
Using the M9536A Embedded Controller LAN Ports 36
Using Multiple Chassis 42
IMPORTANT: The installation and setup information in this manual is generic.
Some AXIe modules and systems require a different installation and setup
procedure than described in this manual. Refer to the installation documentation
supplied with your AXIe module and or system for detailed installation
information.
Safety of any system incorporating the equipment is the responsibility of the
assembler of the system.