22
Keysight M9502A/M9505A AXIe Chassis User Guide
Chassis Installation
Planning the Installation
Planning the Installation
Basic Chassis Verification
The
M9502A/M9505A AXIe Chassis Startup Guide
, provided in print and on CD
with each chassis, includes a step-by-step procedure to connect the chassis to a
host PC and establish basic LAN communication with the chassis using the
built-in Web Interface. Keysight recommends you follow the Steps in the
Startup
Guide
before proceeding. You may also obtain the latest
Startup Guide
at
www.keysight.com/find/axie-chassis
To verify basic chassis operation, it is not mandatory to install modules, mount
the chassis, or interconnect to other chassis.
Complete Installation
After basic chassis operation is verified, you can complete the installation:
Install Modules
Install the instrument modules in the chassis (see
). If
you’ll be rackmounting the chassis, it is easiest to remove the bumpers (see
) before installing modules.
Mount the Chassis
If required, rackmount the chassis using an available
hardware kit. You will need to remove the bumpers before rackmounting the
chassis. See
for instructions; this section also provides considerations
for benchtop use.
Make MultiFrame or Multiple Chassis Connections
You may interconnect
two or more AXIe chassis. For more information, see
Once Chassis Are In Place:
Set Up a Host PC
Reconnect the chassis to the host PC (complete
instructions are in the
Startup Guide
).
Install Software
You should have already installed the chassis device drivers
and Keysight IO Libraries Suite on your host PC. You should now install any
device drivers or Soft Front Panel software required for your installed modules.
See
.
IMPORTANT:
The installation and setup information in this manual is generic.
Some AXIe modules and systems require a different installation and setup
procedure than described in this manual. Refer to the installation documentation
supplied with your AXIe module and or system for detailed installation
information.
Summary of Contents for M9502A
