Keysight M9502A, User Manual, Page: 61 / 142

Keysight M9502A/M9505A AXIe Chassis User Guide 51
Trigger Routing Page Navigating the Web Interface
Trigger Routing Page
Click the button to display the Trigger Routing page. This page allows
you to view and assign static trigger routing through the ESM, using the chassis
Crosspoint Switch .
Trigger Routing on your M9505A AXIe 5 Slot
Chassis
This page allows control of trigger routing connections through the crosspoint
switch between the chassis backplane and external connections located on the
the Embedded System Module (ESM). These connections may be applied,
saved as a default configuration, and later restored if necessary. For more
detailed information on the trigger subsystem, see the
M9502A/M9505A AXIe
Chassis User's Guide.
Please note this page does not control signal routing on module slots. Refer to
the routing setup instructions for those modular instrument products.
Output
Signal
Output
Enable
Input
Signal
Conditions
Destination
To:
Chassis
Internal
Backplane
AXIe Trigger
Bus
TRIG 0
Static 0
TRIG 1
Static 0
TRIG 2
Static 0
TRIG 3
Static 0
TRIG 4
Static 0
TRIG 5
Static 0
TRIG 6
Static 0
TRIG 7
Static 0
TRIG 8
Static 0
TRIG 9
Static 0
TRIG 10
Static 0
TRIG 11
Static 0
SYNC
Static 0
Sync routed through crosspoint
switch
AXIe Star
Trigger
To Slot 1
Static 0
To Slot 2
Static 0
To Slot 3
Static 0
To Slot 4
Static 0
To Slot 5
Static 0
Chassis
External
Connectors
SMA Trigger
In
Threshold Volts:
1.65
Inversion:
None
Out
Static 0
Pulsed:
None
Inversion:
None
SMA Clock
In
May be connected to a 10
MHz clock source.
Out
Multiframe
Interconnect
Flag 1
Static 0
Flag 2
Static 0
Flag 3
Static 0
Flag 4
Static 0
Apply Changes Don't Apply Changes, Keep Previous Settings Clear Form
Save Trigger Routing as Default State
Restore Trigger Routing from Default State
Restore Factory Default