Keysight M9502A, User Manual, Page: 43 / 142

Keysight M9502A/M9505A AXIe Chassis User Guide 33
Mounting the Chassis Chassis Installation
6
Slide the bumpers off the chassis.
Reinstalling the Bumpers and Carry Handles
If you remove the chassis from the rack to make it portable or for desktop use or
if you ever need to ship the chassis, reinstall the front and rear bumpers and
carry handles. Reverse the previous procedures to install the bumpers and
handles.
A thread-lock screw must be used to secure the handles to the chassis. A new
handle screw kit (M9502-80011) is available for use with both chassis. The screws
are now 14mm long. Tighten the handle screws to 25kgf.cm (21.8 in-lbs).
On both the M9502A and M9505A chassis, do not attempt to install the carry
handles without the front and rear bumpers. Do not install handle screws
without handle and bumpers installed. Handle screws are too long without the
other components installed and could result in damage to the chassis. If you
remove the chassis from a rack, you should reinstall both the front and rear
bumpers and the carry handles