Keysight M9502A, User Manual

Page: 34 / 142

24 Keysight M9502A/M9505A AXIe Chassis User Guide
Chassis Installation Installing Modules
To Remove a Filler Panel Module
1
Power down and unplug the AXIe chassis.
2
Fully loosen the captive retaining screws on both sides of the filler panel.
3
Grasp the panel by the two retaining screws, and slide it out of the chassis.
To Install a Module
1
Power down and unplug the AXIe chassis (see “To Power Down the Chassis”
on page 15).
2
Plan slot usage. If you are using an embedded controller module, it must be in
Slot 1. If there are modules that will be removed often, insert them into the
topmost slots.
Ensure you fully loosened the captive module retaining screws before trying to
extract any module. If you attempt to pull the module out by the screws (for
filler panels) or by using the extraction handles (other modules) with these
screws still engaged, damage to the chassis or module could result.