Keysight Technologies S9100A, Startup Manual

Page: 51 / 107

4 Install Hardware
S9100A 5G Multi-Band Vector Transceiver, Startup Guide 47
Keysight S9100A Option 022 mmWave Transceiver with High IF and Blocker (Dual-
Use Configuration: High IF and mmWave)
on page 45 , one-channel configuration,
consists of two RF transceivers, one mmWave transceiver, as well as one High IF
Channel Card (in the E7770A Common Interface Unit) providing one Tx channel and
one Rx channel, operating in one frequency range at a time:
FR1 frequencies ranging from 380 MHz to 6 GHz
or FR2 banded mmWave frequencies from 24.25 to 43.5 GHz
or High IF frequencies ranging from 6 to 12 GHz
High IF frequencies are provided by using additional High IF input & output connectors
that route the signal path through up and down converters, located on a Channel
Card, in the Keysight E7770A Common Interface Unit (CIU).
This configuration also provides the capability to perform Rx tests with a
Blocking signal (interfering signal). This configuration can generate a Wanted signal
and at the same time generate a Blocking signal; a Wanted signal (produced from the
RF Out of a Primary M9410A VXT) is combined with a Blocking signal (produced from
the RF Out of a 2
nd
M9410A VXT). The combined Wanted and Blocking signals are
available in all three frequency ranges: FR1, FR2, or High IF.