Keysight Technologies S9100A, Startup Manual

Page: 100 / 107

8 S910xA SCPI Programming Commands
8. 0. 7 Chassis Subsystem
:CHASsis:TRIGger:ROUTe TRIG1|TRIG2,NONE,PXI0...PXI7
:CHASsis:TRIGger:ROUTe? TRIG1|TRIG2
The chassis trigger route command routes front panel trigger 1 or front panel trigger 2
to none or any one of the eight PXI trigger lines (numbered PXI0 to PXI7).
The chassis trigger route query returns the current routing from front panel trigger 1
or front panel trigger 2.
Important!
By convention, the front panel triggers are set on bus segment 2.
To forward the triggers between bus segments within the PXI
chassis, Keysight Connection Expert should be used to make
persistent bus segment routes on a per trigger line basis. These
routings can be saved to the firmware in the chassis and will be
restored on power cycles.
96 S9100A 5G Multi-Band Vector Transceiver, Startup Guide