Keysight Technologies S9100A, Startup Manual

Page: 41 / 107

4 Install Hardware
S9100A 5G Multi-Band Vector Transceiver, Startup Guide 37
4 Install Hardware
Before installing hardware, Review Safety
Requirements on page 3 .
4. 1 Standard Configurations
The S9100A is available in three standard configurations:
Keysight S9100A Option RH1 5G Multi-Band Vector Transceiver on page 39 ,
one-channel configuration, consists of one RF transceiver and one mmWave
transceiver providing one Tx channel and one Rx channel, operating in one
frequency range at a time:
FR1 frequencies ranging from 380 MHz to 6 GHz
or FR2 banded mmWave frequencies from 24.25 to 43.5 GHz
Keysight S9100A Option 007 mmWave Transceiver with High IF (Dual-
Use Configuration: High IF and mmWave)
on page 42 , one-channel
configuration, consists of one RF transceiver, one mmWave transceiver, as well
as one High IF Channel Card in the E7770A Common Interface Unit (CIU)
providing one Tx channel and one Rx channel, operating in one frequency range
at a time:
FR1 frequencies ranging from 380 MHz to 6 GHz
or FR2 banded mmWave frequencies from 24.25 to 43.5 GHz
or High IF frequencies ranging from 6 to 12 GHz
High IF frequencies are provided by using additional High IF input & output
connectors that route the signal path through up and down converters, located
on a Channel Card, in the Keysight E7770A Common Interface Unit (CIU).
Keysight S9100A Option 022 mmWave Transceiver with High IF and Blocker
(Dual-Use Configuration: High IF and mmWave)
on page 45 , one-channel
configuration, consists of two RF transceivers, one mmWave transceiver, as
well as one High IF Channel Card (in the E7770A Common Interface Unit)
providing one Tx channel and one Rx channel, operating in one frequency range
at a time:
FR1 frequencies ranging from 380 MHz to 6 GHz
or FR2 banded mmWave frequencies from 24.25 to 43.5 GHz
or High IF frequencies ranging from 6 to 12 GHz