Keysight Technologies N9340B, User Manual

Page: 147 / 172

Error Messages
Error Message List
141
Error Message List
Please refer to the error messages list table as below to
find the corresponding message description:
Error
Code
Error Message Description
0 No error
–410 Query INTERRUPTED
Indicates that a condition causing an
INTERRUPTED query occurred (see IEEE
488.2, 6.3.2.7)
–350 Query overflow
Indicates the SCPI remote interface error
queue overflowed.
–321 Out of memory
Indicates an internal operation needed
more memory than that was available.
–224 Illegal parameter
value
Indicates you sent a parameter for this
command that is NOT allowed.
–223 Too much data
Indicates a legal program data element of
block, expression or string type was
received that contained more data than
the device could handle due to related
device-specific requirements or memory.
–222 Data out of range
Indicates a legal data was parsed but
could not be executed because of the
interpreted value was outside the legal
range defined by the analyzer. The
displayed results may be clipped.
–220 No matched module
Indicates no matched measurement or
mode found.
–200 Execution error
This is a generic execution error for
devices that cannot detect more specific
errors. The code indicates on those
execution errors defined in IEEE 488.2,
11.5.1.1.4 has occurred.
–171 Invalid expression
Indicates the data element was invalid, for
example, unmatched parentheses, or an
illegal character.