Keysight Technologies N9340B, User Manual

Page: 114 / 172

Key Reference

MEAS
108
Meas BW
Key access:
[MEAS] > {SEM} > {Offset/Limits} > {More} >
{More}
Specifies the bandwidth to use when measuring the
offset. When using the front panel, only the currently
selected offset is affected. All the offsets are affected
when remote control. This is the multiplier applied to the
resolution bandwidth to determine the bandwidth to
integrate when calculating the power. Meas BW is now
restricted to be 1 and not changeable.
Fail Mask
Key access:
[MEAS] > {SEM} > {Offset/Limits} > {More} >
{More}
Displays the menu to select one of the following logic
keys for fail conditions between the measurement
results and the test limits:
• Absolute
Sets the limit test to show Fail if one offset is larger than
the corresponding limit for
Abs Start
and/or
Abs Stop
.
This is the default selection for each offset for BTS
measurements.
• Relative
Sets the limit test to show Fail if one offsets spectrum
emission mask measurement results is larger than the
corresponding limit for
Rel Start
and/or
Rel Stop
.
• Abs AND Rel
Set the limit test to show fail if one offset’s emission
mask measurement results is larger than both the
corresponding limit for
Abs Start
and
Stop
and the limit
for
Rel Start
and
Rel Stop
.
• Abs or Rel
Set the limit test to show fail if one offset’s the absolute
emission mask measurement results is larger than the
corresponding limit for
Abs Start
and
Stop
or the limit for
Rel Start
and
Rel Stop
.